Tuesday 27 April 2021

Reinforcements for the Bosworth Project and early WWII



Above - Warwick. Richard Neville, 16th Earl of Warwick, who would earn the reputation of ‘Kingmaker’! He died at the Battle of Barnet in 1471 and it seems increasingly, my ‘Bosworth Project’ is becoming populated with the names and heraldry connected with the 1460 - 1471 period, rather than units being specifically built around a Bosworth (1485) order-of-battle.


Not that there is a problem with that for me. I am building two Wars of the Roses ‘pocket armies’, with generic elements, so for example the pike unit, justified as being a representation of the ‘French long spear’ at Bosworth, will see service in a range of War of the Roses disputes and battles.


Oddly, this less than strict observance of historical accuracy seems more acceptable here than it otherwise might or should …. It is rather like allowing a King Tiger tank roam the fields of 1940 France! Except the latter is a total no-no :-).


The Warwick figure is a metal Perry, the flag bearer a plastic Perry.


Having decided that 80mm bases are the way to go with this project, I am now settled with rebasing some rather fine figures (painted) that were kindly donated to me by another blogger. To make the numbers up for complete re-basing, I have added some of my own stuff as padding. 



Above - Somerset and a couple of his retinue archer contingents (2 x 80mm bases). The Somerset figure is a Perry metal. He is Henry Beaufort, 3rd Duke of Somerset, who fought for the Lancastrian cause at Wakefield (1460) and Towton in (1461). 



He was later captured at the battle of Hexham and beheaded ……. another leader who should not make it to the Bosworth battlefield!



Above - a couple of retinue archer contingents in the livery of King Edward IV (Yorkist). Edward was King 1461-1470 and then again from 1471 to his death in 1483. The brief ‘70 - ‘71 interlude saw him exiled, when Henry VI was briefly re-installed as King. 


The unit is a mix of Perry plastic and metals.



Above - and something at last that is more contemporary to the Bosworth battlefield, a contingent of billmen, carrying Sir William Stanley’s banner. They will join his red coated archers who have already passed across the painting table, to form the basis of Sir. William’s ‘ward’.


His involvement in the battle brings some interest, as he turns up with King Richard expecting (read requiring) him to be an ally, but towards the end of the battle, Sir. William puts his force behind Henry Tudor’s cause and counter-attacks Richard's charge.


It is of course more complicated than that, as the question of his allegiance and that of Sir. Thomas Stanley and Northumberland (Percy) is a fluid aspect of the Bosworth battle and something that I am looking forward to encapsulating in a Bosworth scenario. 



Above - also coming off the workbench this week are a couple of early war tanks, to do with a planned future blog article. The first is the highly useful Soviet BT-7 light tank, with it’s decent 45mm gun and Christie suspension.


This plastic kit is one of the ‘fast build’ range of models from Pegasus. You get two models in a box. Here, the vehicle is making a precarious advance over boggy ground.



Above - the 38(t), a Czech built early war light tank that was absorbed into the German army following the Annexation of Czechoslovakia.


The chassis also saw service for the Marder series of tank destroyers and later an interesting little tank hunter - the Hetzer.

 

Again, the kit is one of a pair of models in the box from the Pegasus fast build range, which unfortunately do not come with decals. For the BT-7, the source material I used did not have them identified, so decals were not needed, but for the 38(t) I had to use decals from The Plastic Soldier Company range. 


And the rest!

At the moment on painting sticks, there are a number billmen and full harnessed foot that will supplement the re-basing of the last few stands of my gifted figures, which should then produce two more bases.


One will be for York, the other Lancastrian and it is a fun part of the project to research the various leaders and their colours / banners for this historical flavour.


For the ACW project, a Perry 28mm metal set of dismounted Union cavalry (6 figures) and a set of Confederate dismounted cavalry (6 figures) have just arrived. They will likely go onto bases in 3’s in a skirmish setting.


I am thinking of putting the Union amongst bushes and tall grasses for use on the first day of Gettysburg. The Confederates might get similar or a bit of fencing or some such.


While out at Hobby Craft (UK store) the other day, I picked up a set of 4 poplar type trees by Woodland Scenics for roadsides, a razor saw for cutting balsa wood or plastic bases and from the florist section, some of that Reindeer Moss, to place as scrub around the battlefield.


The moss was bone dry and ready to crumble, but a quick spray of water properly rejuvenated it. I have plenty of the stuff, but this is a sort of brown colour and more useful because of that.


I thought the poplar trees had a few foliage gaps, that if filled would give a better shape, so with a hot glue gun, some new bits of clump foliage (the wrong green though! the only stuff I had was mid green) were added to some of the gaps and dips.


To blend them in, an airbrush with a mid to dark green was gently passed over the whole tree and now it just needs a pass from above with a lighter green to set them off and create some under foliage shadow.

 

It can be quite awkward to get the colour right as the sponge like quality of clump foliage soaks up the first couple of layers of paint, so the initial results just drop back to a dark green. The third spraying with a gentle highlight should do the job ……. or make them look like something out of a Christmas Grotto!


They have been added to 40mm MDF round bases for stability. I did add a steel washer on the first one, but it made the base too thick, the MDF alone is fine.


On the way to me are a couple of 1/72 pre-painted tanks. I generally find these a bit too pristine looking, so they need 'muckying up', especially the tracks, which look too rubberised. Fortunately I seem to have a ‘mud on tracks obsession’, so that should fix it!


As for future of the three immediate ‘Pocket Armies’ projects (Wars of the Roses, ACW and WWII), I continue to debate the best way to do the Bosworth scenario and am increasingly tempted to see Northumberland’s and Sir. Thomas Stanley's behaviour on the field in part falling out from them being a counter-balance to each other and if so, this might conveniently help lay out the pre-battle positions / lines, based on their relative positions, with a little more conviction.


The ACW have the dismounted cavalry to paint and they are tempting to do sooner rather than later, because they are new and shiny, but Captain Sensible tells me that more infantry regiments should be the priority.


The WWII project in the first instance, has settled on mid war, east front 1943 actions, with the biggest job now actually being buildings rather than the fighting forces. The unpainted / unbuilt ‘pile of shame’ also has 1944 American and British forces, but they will need to take a back seat this year.


With the good weather now here, gluing kits and figures together, out in the open air (due to a sensitivity problem with the toxic fumes) in small batches of say 6 figures, to build up and provide a bank of ready units to paint in winter, needs to become part of the daily program!


Anyway, that’s it, I’m worn out now! all that modelling, I’ve used up an entire years motivation in just a few days :-)

Resource Section.

My sister webspace COMMANDERS has a growing collection of shorter AAR’s. Link.

https://commanders.simdif.com


31 comments:

  1. But in such a good way :-)

    ReplyDelete
  2. Norm, I love the ambitious agenda! I'm particularly looking forward to seeing those tanks in action. You have to love the BT-7 it's just such a soviet-looking tank :)

    For your mid war plans, I do hope some TaM battles are in store!

    ReplyDelete
    Replies
    1. Thanks Steve, I know, you look at the front end of the BT-7 and ask ‘why’!

      TaM continues with the open table conversion.

      Delete
  3. Productive period there Norm, no doubt it will continue with so much new stuff to tackle.

    ReplyDelete
    Replies
    1. Thanks David, the longer days with the extra light does make all of the difference in getting ‘jobs’ done.

      Delete
  4. Great looking WotR troops and early-war (WW2) vehicle also, Norm!

    ReplyDelete
  5. Thanks Dean, there is an enjoyable aesthetic to both 28 and 1/72.

    ReplyDelete
  6. There is a lot of terrific brushwork, Norm. Your WotR troops look fab. There are some poses I do not recognize from the Perry Plastics.

    ReplyDelete
    Replies
    1. Thanks Jonathan, the good parts are down to Phil. There are some Perry metals in there, which does help in bringing a bit of variety to the bases.

      I think next up, once I paint another foot Men-at-Arms unit, I will put the two armies on the table to represent the clash between the Vanwards of Norfolk and Oxford at Bosworth to keep my hand in with Sword & Spear rules.

      Delete
  7. Great work on both projects!
    Best regards

    ReplyDelete
  8. Thanks Michal, everything moves forwards ... even if slowly :-)

    ReplyDelete
  9. The medieval figures are superb, truly superb!!

    ReplyDelete
    Replies
    1. Thanks Phil, most are not by my hand, but they do give me something to aim for. :-)

      Delete
  10. Love both the medieval and the WWII additions Norm, great work all round.

    ReplyDelete
    Replies
    1. Thanks Keith, I am trying to catch up with your level of output :-)

      Delete
  11. Lovely looking war of the Roses troops and command, textbook on building a force! The pair of early war tanks are great too!
    Best Iain

    ReplyDelete
  12. Thanks Iain, the involvement with the research bit for leaders, livery, banners etc, takes me right back to that good old fashioned immersion of the hobby with army building, except this time around, the internet makes it so much easier.

    ReplyDelete
  13. Mighty fine additions to the projects there Norm, look forward to seeing your WoR additions in action in and around Piggy Longton.

    ReplyDelete
    Replies
    1. Thanks Phil, blades are being sharpened as we speak.

      Delete
  14. Splendid stuff Norm, lots going on, lovely War of the Roses Figures and nice tanks. With the nice weather I have been slightly distracted but managing to keep a number of projects moving forward 👍

    ReplyDelete
  15. Thanks Matt, I am trying the mantra of ‘a little bit everyday’!

    ReplyDelete
  16. Superb work on th WotR figures Norm, ditto the tanks! Sadly the fine weather has prevented any progress at all on the painting or modelling front, but hoefully soon I'll feel the pull back to the painting table.

    ReplyDelete
  17. Thanks Steve, I am gaming under glass, so the last couple of days have been actually nice to get things onto the table and not suffer the effects of harsh light / heat etc. The good weather has been nice, but methinks we need a bit of rain now!

    ReplyDelete
    Replies
    1. Well, it's been raining here since last night and much needed too. Clear skies forecast with a frost likely in the morning, not good for some of my plants!

      Delete
  18. Wow, you have so much going on there Norm! I must say the WoR's are just beautiful figures, so much animation and variety. I might have to ask you to share your basing method and materials with me as it's so effective and I need a change/improvement to my old fine granite/static grass method which is looking bit tired now. Great stuff all round, looking forward to a return to Piggy Longton soon.

    ReplyDelete
  19. Thanks Lee, there are rumblings in Piggy Longton!

    Basing - well here goes:

    First I make a mixed paste of Vallejo Ground Texture and artists modelling paste in equal measure, add some very fine flock for light texture and a few dabs of chocolate brown paint to kill the paleness. this goes on to blend in the bases.

    Next, PVA glue, slightly thinned spread pretty much (but not all) over the base and especially round feet. To that, I add 1 pinch of course sand dropped in one place, some sprinkles of Noch 2mm green grass and then the rest of the base is liberally covered with ‘my mix’.

    My Mix is just a tub of various flocks and things shaken off bases that I collect, so it is all sorts really. Then I dab in a few areas of PVA and directly on that, I put Woodlands Scenics (Course turf), a course flock that I pat down to give the next elevation of vegetation.

    Finally I go in with the bigger proper tufts from various manufacturers, plus I make some of my own with a Woodlands Scenic Static Applicator, using 12mm and 7mm grasses. I put quite a lot of tufts on the base.

    So there is quite a bit of work in there, but to the ‘real’ eye they look very good, less so to the camera - I don’t know why. But anyway, that is the ‘system’ and it seems to work with my 80mm x 50mm and 80mm x 60mm bases.

    ReplyDelete
  20. Great job on the WoTR. Those are especially nice. You’re being really busy with the hobbyness and that is usually a good thing. The pocket armies are growing steadily. 😀

    ReplyDelete
  21. Thanks Stew …… yes, the hobbyness is good and the pocket armies are moving in the right direction, even if only slowly.

    ReplyDelete
  22. Excellent progress! Slow and steady seems to be working on the Pocket Armies (which in itself a good framework for a multitude of subprojects) And not *too* distracted by other projects as well.

    ReplyDelete
  23. Thanks Shaun, ‘steady as she goes’ I think. My draw between boardgames and figures always leaves me with too much to choose from and the danger is not doing anything by being drawn by too many things. I have my billmen on painting sticks for some much needed melee units …….. so today I started painting a pair of King Tigers! :-)

    ReplyDelete

Thanks for taking the time to comment